Monitoring of Electroencephalogram (EEG) signal for different lobes.

1. For Fp1-F7-T7-P7-O1

STEP 1 : Make all the Correct Connections.

1.  Connect Fp1 lead point of human brain to the positive terminal (Fp1) of first op-amp circuit.

2.  Connect F7 lead point of human brain to the terminal (F7) of op-amp circuit.

3.  Connect T7 lead point of human brain to the terminal (T7) of op-amp circuit.

4.  Connect P7 lead point of human brain to the terminal (P7) of op-amp circuit.

5.  Connect O1 lead point of human brain to the negative terminal (O1) of op-amp circuit.

                      

STEP 2 : Click on check button to check for Correct Connections.

STEP 3 : If Connections are not correct click on reset button for reset connections.

STEP 4 : If Connections are correct click on play/pause button to see recorded EEG signals for Fp1-F7-T7-P7-O1.

STEP 5 : Click on waveform tab for data obsevation and measurement.

STEP 6 : Click on print button to save the observations.

2. For Fp1-F3-C3-P3-O1

STEP 1 : Make all the Correct Connections.

1.  Connect Fp1 lead point of human brain to the positive terminal (Fp1) of first op-amp circuit.

2.  Connect F3 lead point of human brain to the terminal (F3) of op-amp circuit.

3.  Connect C3 lead point of human brain to the terminal (C3) of op-amp circuit.

4.  Connect P3 lead point of human brain to the terminal (P3) of op-amp circuit.

5.  Connect O1 lead point of human brain to the negative terminal (O1) of op-amp circuit.

                      

STEP 2 : Click on check button to check for Correct Connections.

STEP 3 : If Connections are not correct click on reset button for reset connections.

STEP 4 : If Connections are correct click on play/pause button to see recorded EEG signals for Fp1-F3-C3-P3-O1.

STEP 5 : Click on waveform tab for data obsevation and measurement.

STEP 6 : Click on print button to save the observations.

3. For Fp2-F4-C4-P4-O2

STEP 1 : Make all the Correct Connections.

1.  Connect Fp2 lead point of human brain to the positive terminal (Fp2) of first op-amp circuit.

2.  Connect F4 lead point of human brain to the terminal (F4) of op-amp circuit.

3.  Connect C4 lead point of human brain to the terminal (C4) of op-amp circuit.

4.  Connect P4 lead point of human brain to the terminal (P4) of op-amp circuit.

5.  Connect O2 lead point of human brain to the negative terminal (O2) of op-amp circuit.

                      

STEP 2 : Click on check button to check for Correct Connections.

STEP 3 : If Connections are not correct click on reset button for reset connections.

STEP 4 : If Connections are correct click on play/pause button to see recorded EEG signals for Fp2-F4-C4-P4-O2.

STEP 5 : Click on waveform tab for data obsevation and measurement.

STEP 6 : Click on print button to save the observations.

4. For Fp2-F8-T8-P8-O2

STEP 1 : Make all the Correct Connections.

1.  Connect Fp2 lead point of human brain to the positive terminal (Fp2) of first op-amp circuit.

2.  Connect F8 lead point of human brain to the terminal (F8) of op-amp circuit.

3.  Connect T8 lead point of human brain to the terminal (T8) of op-amp circuit.

4.  Connect P8 lead point of human brain to the terminal (P8) of op-amp circuit.

5.  Connect O2 lead point of human brain to the negative terminal (O2) of op-amp circuit.

                      

STEP 2 : Click on check button to check for Correct Connections.

STEP 3 : If Connections are not correct click on reset button for reset connections.

STEP 4 : If Connections are correct click on play/pause button to see recorded EEG signals for Fp2-F8-T8-P8-O2.

STEP 5 : Click on waveform tab for data obsevation and measurement.

STEP 6 : Click on print button to save the observations.

5. For Fz-Cz-Pz

STEP 1 : Make all the Correct Connections.

1.  Connect Fz lead point of human brain to the positive terminal (Fz) of first op-amp circuit.

2.  Connect Cz lead point of human brain to the terminal (Cz) of op-amp circuit.

3.  Connect Pz lead point of human brain to the negative terminal (Pz) of op-amp circuit.

                      

STEP 2 : Click on check button to check for Correct Connections.

STEP 3 : If Connections are not correct click on reset button for reset connections.

STEP 4 : If Connections are correct click on play/pause button to see recorded EEG signals for Fz-Cz-Pz.

STEP 5 : Click on waveform tab for data obsevation and measurement.

STEP 6 : Click on print button to save the observations.