Monitoring of electrocardiogram (ECG) for chest leads V1,V2,V3,V4,V5 and V6.
Monitoring of electrocardiogram (ECG) for chest leads V1,V2,V3,V4,V5 and V6.
1. For Lead V1
STEP 1 : Make all the Correct Connections.
1. Connect V1 Electrode point of human to the positive terminal (V1) of op-amp circuit.
2. Connect (avg) point of right arm electrode, left arm electrode and left leg electrode of human to the negative terminal (avg) of op-amp circuit.
3. Connect Right Leg Electrode (RL) of human to the ground terminal (RL) of op-amp circuit.
STEP 2 : Click on check button to check for Correct Connections.
STEP 3 : If Connections are not correct click on reset button for reset connections.
STEP 4 : If Connections are correct click on play/pause button to see waveform for lead V1.
STEP 5 : Click on waveform tab for data calculations and BPM measurement .
STEP 6 : Click on print button to save the observations.
2. For Lead V2
STEP 1 : Make all the Correct Connections.
1. Connect V2 Electrode point of human to the positive terminal (V2) of op-amp circuit.
2. Connect (avg) point of right arm electrode, left arm electrode and left leg electrode of human to the negative terminal (avg) of op-amp circuit.
3. Connect Right Leg Electrode (RL) of human to the ground terminal (RL) of op-amp circuit.
STEP 2 : Click on check button to check for Correct Connections.
STEP 3 : If Connections are not correct click on reset button for reset connections.
STEP 4 : If Connections are correct click on play/pause button to see waveform for lead V2.
STEP 5 : Click on waveform tab for data calculations and BPM measurement .
STEP 6 : Click on print button to save the observations.
3. For Lead V3
STEP 1 : Make all the Correct Connections.
1. Connect V3 Electrode point of human to the positive terminal (V3) of op-amp circuit.
2. Connect (avg) point of right arm electrode, left arm electrode and left leg electrode of human to the negative terminal (avg) of op-amp circuit.
3. Connect Right Leg Electrode (RL) of human to the ground terminal (RL) of op-amp circuit.
STEP 2 : Click on check button to check for Correct Connections.
STEP 3 : If Connections are not correct click on reset button for reset connections.
STEP 4 : If Connections are correct click on play/pause button to see waveform for lead V3.
STEP 5 : Click on waveform tab for data calculations and BPM measurement .
STEP 6 : Click on print button to save the observations.
4. For Lead V4
STEP 1 : Make all the Correct Connections.
1. Connect V4 Electrode point of human to the positive terminal (V4) of op-amp circuit.
2. Connect (avg) point of right arm electrode, left arm electrode and left leg electrode of human to the negative terminal (avg) of op-amp circuit.
3. Connect Right Leg Electrode (RL) of human to the ground terminal (RL) of op-amp circuit.
STEP 2 : Click on check button to check for Correct Connections.
STEP 3 : If Connections are not correct click on reset button for reset connections.
STEP 4 : If Connections are correct click on play/pause button to see waveform for lead V4.
STEP 5 : Click on waveform tab for data calculations and BPM measurement .
STEP 6 : Click on print button to save the observations.
5. For Lead V5
STEP 1 : Make all the Correct Connections.
1. Connect V5 Electrode point of human to the positive terminal (V5) of op-amp circuit.
2. Connect (avg) point of right arm electrode, left arm electrode and left leg electrode of human to the negative terminal (avg) of op-amp circuit.
3. Connect Right Leg Electrode (RL) of human to the ground terminal (RL) of op-amp circuit.
STEP 2 : Click on check button to check for Correct Connections.
STEP 3 : If Connections are not correct click on reset button for reset connections.
STEP 4 : If Connections are correct click on play/pause button to see waveform for lead V5.
STEP 5 : Click on waveform tab for data calculations and BPM measurement .
STEP 6 : Click on print button to save the observations.
6. For Lead V6
STEP 1 : Make all the Correct Connections.
1. Connect V6 Electrode point of human to the positive terminal (V6) of op-amp circuit.
2. Connect (avg) point of right arm electrode, left arm electrode and left leg electrode of human to the negative terminal (avg) of op-amp circuit.
3. Connect Right Leg Electrode (RL) of human to the ground terminal (RL) of op-amp circuit.
STEP 2 : Click on check button to check for Correct Connections.
STEP 3 : If Connections are not correct click on reset button for reset connections.
STEP 4 : If Connections are correct click on play/pause button to see waveform for lead V6.
STEP 5 : Click on waveform tab for data calculations and BPM measurement .
STEP 6 : Click on print button to save the observations.